0-3
CAUTIONS
1.Do not touch the photoconductive drum. Scratches or smudges on the
drum will cause dirty prints.
2.The fusing unit is extremely hot. Exercise care in this area.
3.Do not look directly at the light source. Doing so may damage your
eyes.
4.Five adjusters are provided on all optional stand/paper drawe r units.
These adjusters should be lowered until they contact the floor.
When moving the machine with the optional stand/paper drawer, be
sure to raise the adjusters. Also, unlock the two casters at the front of
the optional stand/paper drawer. After moving the machine, lower the
four adjusters until they reach the floor and lock the two casters.
5.Do not make any modifications to this machine. Doing so may result in
personal injury or damage to the machine.
6.Since this machine is heavy, it is recommended that it be moved by
more than one person to prevent injury.
7.When connecting this machine to a computer, be sure to first turn both
the computer and the machine off.
8.Do not make copies of anything which is prohibited from copying by
law. The following items are normally prohibited from printing by
national law. Other items may be prohibited by local law.
● Money ● Stamps ● Bonds ● Stocks
● Bank drafts ● Checks ● Passports ● Driver's licences
The part indicated in the illustration is only to be handled b y a service technician.
Absolutely do not touch this part.
Some models include the document filing function, which stor es document image data on the machine’s hard disk.
Stored documents can be called up and printed or transmitted as need ed. If a hard disk failure occurs, it will no
longer be possible to call up the stored document data. To prevent the loss of i mportant documents in the unlikely
event of a hard disk failure, keep the originals of important documen ts or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corpo ration bears no responsibility for any damages
or loss due to the loss of stored document data.
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE
DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED SERVICE
REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
This product utilizes tin-lead solder, and a fluorescent lamp contai ning a small amount of mercury.
Disposal of these materials may be regulated due to environmental co nsiderations.
For disposal or recycling information, please contact y our local authorities or the Electronics Industries Alliance:
www.eia.org
Fusing unit
Adjuster
Lock Release
00.fm 3 ページ ２００４年１０月２６日 火曜日 午前９時２８分