Sharp LC-32LE340E operation manual Connecting to a Wireless Network Optional

Connecting to a Wireless Network (Optional)

IMPORTANT: “Veezy 100” USB dongle(sold separately) is required to use wireless network feature.

To use your TV with your wireless network, you need a “Veezy 100” Wireless USB dongle. To make your modem’ s SSID visible, you should change your SSID settings via modem’s software. The TV cannot connect to the networks with hidden SSID.

For connecting to a wireless LAN network, you should perform the following steps:

•Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.

•Ensure that Nero Media Home software is installed to your PC. (for DLNA function).

•Afterwards, you should connect wireless adaptor to one of the USB inputs of the TV.

To configure wireless settings please refer Network Settings section in Settings menu.

Broadband ISP

Connection

PC with Nero Media Home software installed

USB Inputs (Side of the TV)

Wireless Lan

Adaptor

•A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous 2.4 and 5 GHz bands designed to increase bandwidth. Optimized for smoother and faster HD video streaming, file transfers, and wireless gaming.

•Use LAN connection for quicker file sharing between other devices like computers.

•The frequency and channel differ depending on the area.

•The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions, the line traffic, and the products that you use. The transmission may also be cut off or get disconnected depending on the radio wave conditions DECT phones, or any other WiFi 11b appliances. The standard values of the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission.

•The location where the transmission is most effective differs depending on the usage environment.

•Wireless LAN adaptor should be connected directly to the TV’s USB port. USB hubs are not supported.

•To configure wireless settings please refer wifi section in Settings menu.

•Wireless LAN adaptor supports 802.11 a,b,g & n type modems. It is highly recommended that you should use IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.

•Use the other usb input, if you experience problems with audio/video performance.

•You must change your modem’s SSID when there are any other modems around with the same SSID. You can encounter connection problems otherwise. Use wired connection instead if you experience problems with wireless connection.

English - 17 -

A01_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED _GOLD11_10075886_50201414.indd 17 16.04.2012 14:49:57