![](/images/new-backgrounds/1188499/18849925x1.webp)
Connecting the monitor and turning the monitor on and off
When connecting using a separately sold 2- input cable
The separately sold
(One analog and one digital connection.)
1.Connect the
Input terminal 1 and 2 You can connect to either side.
mini
Analog signal cable
(commercially available)
Digital signal cable
-For analog connection, use the commercially available analog signal cable (both ends should be mini
2.Connect each signal cable to the computers.
Analog RGB output terminal
Analog signal cable
Digital signal cable | Digital RGB output terminal |
|
-Paying attention to connector orientation, firmly insert the signal cable into the PC, and then tighten the screws at both sides.
Notes:
-When using the
-The monitor connected to the
Connecting the monitor to a power source
Power terminal
AC outlet
Power cord
Connecting a USB device
This monitor is equipped with a USB standard (Rev. 1.1)
Downstream (2 ports)
Each of these ports enables connection of a USB device with working current up to 500 mA.
Upstream (1 port)
This enables connection of a USB compatible computer or USB hub.
Notes:
-If a USB cable is required, please use the one included.
-Before connecting, ensure that the shape of the USB cable connector is correct.
-For information regarding the USB function (such as
-Some computers, OS and other devices may not be able to be activated. To ascertain a certain device's USB compatibility, please contact the manufacturer of the device.
Upstream
USB cable
Downstream
English
13