Sharp LL-T2020 operation manual About the ICC profile, For Windows95, For Windows98, English

Installing set-up information and the ICC profile (For Windows)

Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer’s own operation manual while reading this.)

About the ICC profile

An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized.

-Windows98/2000/Me/XP all use the ICC profile.

-When installing Windows98/2000/Me/XP set-up information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to Installing the ICC profile on page 31.

-When using the ICC profile, set as follows:

-[COLOR MODE] [WHITE BALANCE]: [STD]

-[GAMMA] [HUE] [SATURATION]: [0]

-In [6 COLORS] menu, [HUE] and [SATURATION] for each color: [0]

For Windows95

Installing monitor set-up information into Win- dows95.

This explanation assumes that the CD-ROM drive is "D drive".

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].

5.Click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:] then click [OK].

6.Confirm that the monitor details are selected, and click [OK].

7.Check that the monitor details are displayed, then click [Apply].

8.Click [OK], and close the window.

For Windows98

Installing monitor set-up information into Win- dows98, and setting the monitor's ICC profile as a predetermined value.

This explanation assumes that the CD-ROM drive is "D drive".

If the "Add new Hardware Wizard" has appeared:

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Click [Next].

3.Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

4.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

5.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish]. If the "Add New Hardware Wizard" appears, repeat the installation commands beginning from 2 above.

If the "Add New Hardware Wizard" has not ap- peared:

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced] and [Monitor].

5.In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].

6.Click [Next].

7.Click on [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

8.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish].

10.Check that the monitor details are displayed, then click [Apply].

11.Click [OK], and close the window.

English

29