Sharp LL-T2020 operation manual Specifications, Product specifications

Specifications

Product specifications

LCD display

51 cm measured diagonally

Advanced Super-V and Anti Glare Low Reflection TFT LCD module

Resolution (max.)

UXGA 1600 x 1200 pixels Displayable colors (max.)

Approx. 16.77 million colors (8 bit) Brightness (max.)

220cd/m2 Dot pitch

0.255(H) x 0.255(V) mm Contrast ratio

350:1

Angle of visibility

Left-right 170° ; Up-down 170° (contrast ratio >= 10)

Screen display size

Horizontal 408 mm x Vertical 306 mm Video signal

Analog: Analog RGB (0.7Vp-p) [75Ω]

Digital: DVI standard based on 1.0 Sync signal

Separate Sync (TTL level: +/-), Sync on

Green, Composite Sync (TTL level: +/-) Expansion compensation

Digital scaling

(Enlargement VGA/SVGA/XGA/SXGA etc. to full screen size. )

Plug & Play

VESA DDC2B compatible Power management

VESA: based on DPMS

DVI: based on DMPM Input signal terminal

29pin DVI-I x 2 USB hub function

1upstream port, 2 downstream ports (selfpowered hub based on USB standard Rev 1.1)

Height adjustment

Adjustment range: Approx. 60 mm Screen rotation

Clockwise 0 - 90° Screen tilt

Upward approx. 0 -30° ; downward approx. 0 - 5° Screen swivel

Approx. 90° from left through right Power supply

AC100 - 240V, 50/60Hz Temperature of operating environment

5- 35° C

Power consumption

53W (Not using USB hub)

(60W maximum, 3W when in power-saving mode)

Dimensions (W x D x H) (Units: mm)

With long width screen: 450 x 228 x 438 - 498

With long heightscreen: 348 x 228 x 490 - 550 Weight

Approx. 10 kg

Display area only, approx. 6.5kg

Dimensions (Units: mm)

450

498	348
	438

310

348

550	450
	490

228

-Analog signal cable: Approx. 2.0m

-Digital signal cable : Approx. 2.0m

-USB cable : Approx. 2.0m

-Digital signal cable, NL-C04J (purchased separately): Approx. 2.0m

-Analog signal cable, NL-C02E (purchased separately): Approx. 2.0m

-2-input cable, NL-C03J (purchased

separately): Approx. 0.25m

26