Sharp LL-T2020 Installing set-up information and the ICC profile For Windows, For Windows2000

Installing set-up information and the ICC profile (For Windows)

For Windows2000

Installing monitor set-up information into Win- dows2000, and setting the monitor's ICC profile as a predetermined value.

This explanation assumes that the CD-ROM drive is "D drive".

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced] and [Monitor].

5.Click on [Properties], [Driver] and [Update Driver].

6.When [Upgrade Device Driver Wizard] appears, click [Next].

7.Check [Display a list of the known drivers for this device so that I can choose a specific driver] and click [Next].

8.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9.Select the monitor from the list displayed and click [Next].

10.Click [Next], confirm that the monitor's name appears on the screen, and click [Finish]. If [The Digital Signature Not Found] appears, click [Yes].

11.Click on [Close].

12.Click [OK], and close the window.

For WindowsMe

Installing monitor set-up information into WindowsMe, and setting the monitor's ICC profile as a predetermined value.

This explanation assumes that the CD-ROM drive is "D drive".

If the "Add new Hardware Wizard" has appeared:

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Check [Specify the location of the driver [Advanced]] and click [Next].

3.Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

4.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

5.Select the monitor details from the list, then click [Next], [Next], and [Finish]. If the "Add new Hardware Wizard" appears, repeat the installation commands beginning from 2 above.

If the "Add New Hardware Wizard" has not ap- peared:

1.Load the accessory CD-ROM into the CD-ROM drive of the computer.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced] and [Monitor].

5.In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].

6.Check [Specify the location of the driver [Advanced]] and click [Next].

7.Check [Display a list of all the drivers in a specific location, so you can select the driver you want.] and click [Next].

8.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].

9.Select the monitor details, then click [Next], [Next], and [Finish].

10.Check that the monitor details are displayed, then click [Apply].

11.Click [OK], and close the window.

30