Sharp LL-T2020 Adjusting the screen display With digital connection, MODE SELECT-2 Menu, Language

Adjusting the screen display (With digital connection)

MODE SELECT-2 Menu

MODE SELECT- 2
OSD
LANGUAGE
SCALING	0
400 LINES	640	720
I N P U T- 2 D I G I TA L
1600 x 1200	V:60Hz	H:75kHz

Notes:

-Depending on the resolution of the input signal, even if menu options can be selected, the display may not change.

-To choose a menu option: button

-When adjustment complete: MENU button

OSD

After selecting [OSD], press the button. (When adjustment complete: MENU button)

OSD H-POSITION (OSD horizontal position)

The position of the OSD display can be moved

to the left and right. ( buttons)

OSD V-POSITION (OSD vertical position)

The position of the OSD display can be moved

up and down. (	buttons)
OSD PIVOT

The orientation of the OSD display can be

changed.( buttons)

ON: Orientation for long height display

OFF: Orientation for long width display

LANGUAGE

You can choose the language used in OSD Menu.

1.After selecting [LANGUAGE], press the button.

2.Select the desired language using the button.

3.Press the MENU button.

SCALING (Level of scaling)

Adjusts the image to optimum sharpness when

Screen expansion is taken. ( buttons)

400 LINES (degree of resolution)

You can specify the horizontal resolution of a 400-

line screen when using US text, etc. ( buttons) 640: 640 X 400 dot mode

720:720 X 400 dot mode (US text etc.)

Note:

-As the resolution input for other than 400 lines is done automatically, there is no need to set it.

24