Sharp LL-T2020 GAIN CONTROL Menu, COLOR CONTROL Menu, Auto Gain Control function, Black Level

Adjusting the screen display (With analog connection)

GAIN CONTROL Menu			COLOR CONTROL Menu
GAIN CONTROL				COLOR CONTROL
	MANUAL	AUTO		COLOR MODE	sRGB	STD	VIVID

WHITE BALANCE

BLACK LEVEL	51	GAMMA	0
CONTRAST	65	HUE	0

SATURATION 0

		6 COLORS
INPUT-1 ANALOG		INPUT-1 ANALOG
1600 x 1200	V:60Hz H:75kHz	1600 x 1200	V:60Hz H:75kHz

English

MANUAL: Individual menu options are manually adjusted.

AUTO: Every menu option is automatically adjusted using the Auto Gain Control* function.

Notes:

-Press the button to select [AUTO].

-To choose a menu option: button

-To go to the next menu: MENU button

* Auto Gain Control function

-The Auto Gain Control adjusts contrast and black level based on the brightest color of the image displayed. If you are not using the Adjustment Pattern it is necessary to have an area of 5 mm x 5 mm of white displayed, and if not adjustments may not be possible. (In such case, [OUT OF ADJUST] will appear and setting values remain unchanged.)

-If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. Please perform manual adjustment instead.

BLACK LEVEL

Total screen brightness can be adjusted while

watching the color pattern. ( buttons)

Color pattern

Notes:

-To choose a menu option: button

-To go to the next menu: MENU button

COLOR MODE
Color tone can be set as below. (	buttons)

sRGB ....... sRGB is international standard of

color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and repre- sents color tone close to it original image.

STD ......... Displays image with the color tone

results from original scheme of liquid crystal panel.

VIVID ....... Displays an image with dynamic and

VIVID primary colors.

Subsequent items can be set when the [COLOR MODE] is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the button and display the adjustment menu.

WHITE BALANCE

COOL STD WARM USER

R - CONTRAST

G - CONTRAST

B - CONTRAST

OK ... < MENU >

CONTRAST

While watching the color pattern, adjustments can be made so that all gradations appear. ( buttons)

Notes:

-On settings other than [STD] not all gradations can be displayed. To display all gradations, set to [STD].

-Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

-Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [B- CONTRAST], in order to make fine adjustments.

-Use the button to select [R-CONTRAST], [G- CONTRAST] and [B-CONTRAST].

-When adjustment complete: MENU button

19