Sharp LL-T2020 operation manual Product description

Product description

13

12

	1	2	3	4	5	6	7	8	9 10	11
1.	INPUT button		..............................			To switch between the signal’s input terminals.
2.	MENU button		...............................			This button is used to pop-up, select and close the OSD (On Screen
					Display) Menu.
3.	button					This button is used to select menu options when the OSD Menu is
					displayed.
4.	buttons					When the OSD Menu is displayed:
						These buttons are used to increase or decrease the value of a
						selected option.
					When the OSD Menu is not displayed:
						These buttons are used to adjust backlight brightness.
5.	Power button
6.	Power LED					This LED is lit green when in use and orange when in power-saving
					mode.
7.	DVI-I input terminal					The computer’s digital RGB output terminal or analogue RGB output
					terminal can be connected here.

For a digital signal input: It can be connected to a computer with a DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has UXGA output ability. Depending on the computer to be connected, correct display may or may not be possible.

8.USB port (upstream: 1 port)

9.USB port (downstream: 2 ports)

10. Security lock anchor	By connecting a security lock (commercially available) to the security
	lock anchor, the monitor is fixed so that it cannot be transported.
	The security slot works in conjunction with Kensington Micro Saver
	Security Systems.
11. Power terminal
12. Main power switch
13.Ventilation openings	Note: Never block the ventilation openings as this may lead to
	overheating inside the monitor and result in malfunction.

English

9