106
REMOVING MISFEEDS
When a paper misfeed occurs, the message "A misfeed has occurred ." will appear in the touch panel and printing
and scanning will stop. In this event, touch the [Information] key in the t ouch panel. When the key is touched,
instructions for removing the misfeed will appear. Follow the instruct ions. When the misfeed is cleared, the
message will automatically clear.
The blinking mark in the image at left indicates the approximate position of the mi sfeed.
Touch the [Information] key to display the following
screen.

(A) Instructions for removing the misfeed appear

here.

(B) Animation showing what to do.

(C) Display the previous screen or the next screen.

(D) This closes the information screen.

The information screen cannot be closed until the
misfeed is removed.
For detailed procedures for removing misfeeds, see "REMOVING M ISFEEDS" in "8. TROUBLESHOOTING" in
the Operation Guide.
A misfeed has occurred.
Turning M/C off now causes data loss.
Information OK
Exit
Open the centre cover and remove the misfed paper.
Misfeed Removal
Back Next

(C)

(A)

(D)

Misfeed location

(B)

• While the message appears, printing and scanning cannot be resumed .
• If the message does not clear even after the misfeed has been removed, the causes below are possible. Check
once again.
- The misfeed was not correctly removed.
- A torn piece of paper remains in the machine.
- A cover or unit that was opened or moved to remove the misfeed was no t returned to its original position.