Sharp R-1900M operation manual Express Defrost Setting, Procedure, Display, Pause Timing

NOTES:

1.Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factor for Double/Triple Quantity.

2.The multiplication factors can be set from 0.01 to 9.99 for double quantity and triple quantity.

3.When you want to know the multiplication factor for triple quantity, press the DOUBLE/TRIPLE QUANTITY twice at step 1 after pressing the CUSTOM SETTING pad twice.

4.Multiplication Factors for Double/Triple Quantity can be checked or changed before pressing the STOP/CLEAR pad to exit for Custom Setting Function.

11. Express Defrost Setting

*Suppose you want to change the Express Defrost set factory settings to the following:

	Defrosting Time		Power Level
STAGE 1	T x 0.30 + 10 sec.		50%
STAGE 2	T x 0.15 + 20 sec.		20%
STAGE 3	T - STAGE1 - STAGE2		10%
Pause	When 70% of total defrosting time has
Timing	passed.
Procedure		Display

Express Defrosting uses 3 stages to defrost foods quickly. The defrosting sequence is preset as follows, but you can change the setting.

	Defrosting Time	Power Level
STAGE	T x A1: (0.20*) + B1: (20*) sec.	PL1 (40*) %
1
STAGE	T x A2: (0.13*) + B2: (30*) sec.	PL2 (30*) %
2
STAGE	T - STAGE1 - STAGE2	PL3 (20*) %
3
Pause	See the table for The Pause
Timing	Timing below (50*)

T : INPUT TIME (TOTAL COOKING TIME)

x 2

1Press the CUSTOM SETTING pad twice within 2 seconds and press the EXPRESS DEFROST pad.

(The Express Defrost setting of each phase is shown for 1.5 seconds at 0.3 second intervals until the MANUAL/REPEAT pad is pressed.)

(STAGE 1)

DEF. CHECK

(A1)
DEF.	CHECK

(B1)

DEF. CHECK

(Power Level 1)

DEF. CHECK

(B2)

DEF. CHECK

(Power Level 2)

DEF. CHECK

(STAGE 3)

DEF. CHECK

(Pause Timing)

DEF. CHECK

*: The numbers in the parentheses are factory settings and can be adjusted.

Express Defrost is preset to pause during the sequence when 50% of total defrosting time has passed to check food. Pause timings can also be adjusted.

Pause Timing

KEY	Display	Pause Timing
0	0	No pause.
1	1	After 10% of total cooking time.
2	2	After 20% of total cooking time.
3	3	After 30% of total cooking time.
4	4	After 40% of total cooking time.
5	5	After 50% of total cooking time.
6	6	After 60% of total cooking time.
7	7	After 70% of total cooking time.
8	8	After 80% of total cooking time.
9	9	After 90% of total cooking time.
START	A	After ending of each stage

		(STAGE 2)		(Power Level 3)
		DEF.	CHECK		DEF. CHECK
		(A2)
		DEF.	CHECK
2	Press the MANUAL/
	REPEAT pad and enter
	desired multiplication for			DEF.
	A1 at Stage 1.
			3
	(Ex: Enter 3,0 for 0.30.)
				DEF.
			0
				DEF.
3	Press the MANUAL/REPEAT
	pad and enter desired time
	for B1 at Stage 1.			DEF.
	(Ex: Enter 1 for 10 seconds.)
			1
4	Press the POWER LEVEL			DEF.
	pad and enter desired
	power level for PL1 at				DEF.
	Stage 1.
	(Ex: Enter 5 for 50%)		5

DEF.

16