R-654M O/M & C/B 05/04/2001 10:58 Page 7

Website: http://www.sharp.co.uk/support

Help Line: 08705 274277 (office hours)

 

BEFORE OPERATION

Plug in the oven.

1.The oven display will flash:

2.Press the STOP/CLEAR key.

3.The display will show:

To set the clock, see below.

When using the oven for the first time:

Heat the oven using GRILL mode without food for 20 minutes. See note on page 9.

1.

STIR TURN KG•LB GRILL MICRO COOK

2.

3.

STIR TURN KG•LB GRILL MICRO COOK

x1

SETTINGTHE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock:

1.To set the 12 hour clock, press the DELAY START/CLOCK SET key once, will appear in the display.

2.To set the 24 hour clock, press the DELAY START/CLOCK SET key twice, will appear in the display.

Example:

To set the 24 hour clock to 23:35:

x1

x2

1. Select the 24 hour clock.

2.To enter the hours press the 10 MIN key twice then the 1 MIN key 3 times.

3.To change from hours to minutes press the DELAY START/ CLOCK SET key once.

x2

x2

x3

x1

4. To enter the minutes press the 10 MIN

 

5. To start the clock press the

 

key 3 times then press the 1 MIN key 5

DELAY START/CLOCK SET

 

times.

 

key once.

 

 

 

 

Check the display:

x3

x5

x1

STIR TURN KG•LB GRILL MICRO COOK

 

NOTES:

To check the time of day during a cooking process, press DELAY START/CLOCK SET key and the time of day will remain on the display as long as you keep your finger on the key. This does not affect the cooking process.

If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not

been set, the display will only show

when cooking is complete.

If the electrical power supply to your microwave oven is interrupted, the display will intermittently show: after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

When you want to reset the time of day, follow the above example again.

7

Page 9
Image 9
Sharp R-654M operation manual Before Operation, Setting the Clock, Delay START/CLOCK SET