Sharp R-85ST-A operation manual Setting the Clock, Energy Save Mode

Models: R-85ST-A

1 68
Download 68 pages 36.53 Kb
Page 11
Image 11

R-85ST-A_En Ckbk.qxd 7/2/07 2:42 PM Page 9

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.

 

1. To set the 12 hour clock, press the CLOCK

Step 1.

Step 2.

SETTING key once, as in Step 1 opposite.

 

 

2. To set the 24 hour clock, press the CLOCK

x1

x2

SETTING key twice, as in Step 2 opposite.

 

 

Example: To set the 24 hour clock to 23:35:

 

 

1. Choose the 24 hour clock

2. Set the hours:

 

3. Change from hours to mins

by pressing the CLOCK

Press the 10 MIN key twice.

by pressing the CLOCK

SETTING key twice.

Press the 1 MIN key three times.

SETTING key once.

x2

x2

x3

x1

4. Set the minutes:

5. Start the clock.

Check the display.

Press 10 MIN key three times.

 

 

 

Press 1 MIN key five times.

x3

x5

x1

 

NOTES:

1.Press the STOP key if you make a mistake during programming.

2.If the oven is in cooking or minute timer mode and you wish to know the time of day, touch the CLOCK SETTING key. As long as your finger is touching the key, the time of day will be displayed.

3.If the electrical power supply to your microwave oven is interrupted, plug in the oven again, then open and close the door. The display will show

“ENERGY SAVE MODE”.

If this occurs during cooking, the programme will be erased. The time of day will also be erased.

4.When you want to reset the time of day, follow the above example again.

5.If you do not set the clock, press the STOP key

once will appear on the display. When the

operation of the oven is finished, will reappear on the display instead of the time of day.

6.If you set the clock, energy save mode does not work.

MICROWAVEPOWER LEVELS

Your oven has 5 power levels. To choose the power level, follow the advice given in the cookbook.

900 WATT = 100 % output

 

630 WATT = 70 % output

270 WATT = 30 % output

450 WATT = 50 % output

90 WATT = 10 % output

To set the power, touch the MICROWAVE POWER LEVEL key until the desired level is displayed.

If the MICROWAVE POWER LEVEL key is touched once, will be displayed. If you miss your desired level, continue touching the MICROWAVE POWER LEVEL key until you reach the level again.

If the level is not selected, the level 900 W (100 %) is automatically set.

ENGLISH

GB-5

Page 11
Image 11
Sharp R-85ST-A operation manual Setting the Clock, Energy Save Mode