S E T U P S E N D
7 - 3
Press Black Fax Start.
3
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook/Hold to listen for a dial tone.
1 Place the original face down in the ADF.
2 Enter the fax number using the dial pad, One Touch, Speed Dial or Search. (See Speed Dialing, page 8-5.)
When you hear the fax tone, press Black Fax Start. Replace the handset.
4
5
STANDARD—Suitable for most typed documents.
FINE—Good for small print; transmits a little slower than Standard resolution.
S. FINE—Good for small print or artwork; transmits slower than Fine resolution (black and white only).
PHOTO—Use when original has varying shades of gray; this is the slowest transmission time (black and white only).
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones while sending a fax.
1 Place the original face down in the ADF.
2 Pick up the handset and listen for a dial tone—OR—pressHook/Hold and listen for a dial tone.
3 Enter the fax number you want to call. You can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call using Search. (See One Touch Dialing, page 8-5.)
Press Stop/Exit.
3
want, and then press Menu/Set.
1
2

Fax Resolution

When you have a document in the ADF, you can use the FAX Resolution key to temporarily change the setting. Press FAX Resolution repeatedly until the LCD shows the setting you want.

—OR—

You can change the default setting.

Press Menu/Set, 2, 2, 2.

2.FAX RESOLUTION

 

Press or to select the resolution you