Color Fax Transmission
Your fax machine allows you to transmit a color fax.
1Place the original face down in the ADF.
2Enter the fax number using the dial pad, Speed Dial or Search.
3Press Color Fax Start.
When you are sending a color fax, the fax machine starts sending the fax without scanning the original into memory.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to try again. Anytime you want to make a second call to the last number dialed, press Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the fax machine will automatically redial (up to three times at 5 minute intervals).
Dual Access (Not Available for Color Faxes)
You can scan up to 50 documents into the fax memory, even while the machine is receiving or sending another fax (from memory). You can set temporary settings for each fax you’re scanning, except Polling.
If you try to scan and store a 51st fax, the fax machine will send it immediately, without storing it in memory.
Note If you get a OUT OF MEMORY message while scanning the first page of a fax, press Stop/Exit to cancel scanning. If you get a OUT OF MEMORY message while scanning a subsequent page, you can press Black Fax Start to transmit the pages scanned so far, or press Stop/Exit to cancel the operation.
1Place the original face down in the ADF.
2Enter the fax number.
3Press Black Fax Start. The fax machine scans the original and the LCD shows the job number (#XXX) of the fax and how much memory is available. Then the fax machine starts dialing. You can immediately repeat Steps 1 to 3 for the next fax.
Note Your machine normally operates in Dual Access mode. However, to send a color fax, you must override Dual Access and use Real Time Transmission. 
The number of pages you can scan into memory varies with the data they contain.
S E T U P S E N D | 7 - 4 |