Real Time Transmission

When you are sending a fax, the fax machine will scan originals into memory before sending. Then, as soon as the phone line is free, the fax machine will start dialing and sending the fax. If memory becomes full, the fax machine will send the document in real time (even if REAL TIME TX is set to OFF).

Sometimes you may want to send an important document immediately, without waiting for memory transmission. You can set REAL TIME TX to ON.

1Place the original face down in the ADF.

2

Press Menu/Set, 2, 2, 5.

5.REAL TIME TX

 

 

3

To change the default setting, press or to

 

select ON (or OFF), and then press Menu/Set.

Go to Step 5—OR—For the next fax transmission only, press or to select

NEXT FAX ONLY, and then press Menu/Set.

4 For the next fax only, press or to select ON (or OFF),

and then press Menu/Set.

5Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and then go to Step 6.

6Enter fax number, and then press Black Fax Start.

If you are sending a color Fax, the fax machine will send it in real time even if

REAL TIME TX is set to OFF.

Checking Job Status

Check which jobs are still waiting in memory to be sent. (If no jobs are waiting, the LCD shows NO JOB WAITING.) (See Canceling a Job in Memory, page 7- 6.)

1Press Menu/Set, 2, 6.

2 If you have multiple jobs waiting, press or to scroll through the list.

3Press Stop/Exit.

7 - 5 S E T U P S E N D