2.FAX STORAGE
ERASE ALL FAX? 1.YES 2.NO

4If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your fax machine telephone number followed by # #, and then press Menu/Set. For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #

—OR—

If you do not need a PIN, press Redial/Pause, enter the fax number of your fax machine followed by # #, and then press Menu/Set.

For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #

5Press Stop/Exit.

You cannot change a Paging number or PIN remotely.

Note Press Redial/Pause for each 3.5 second delay, as needed.

Setting Fax Storage

If you set Fax Storage to ON, you will be able to retrieve fax messages from another location using Fax Forwarding, Paging, or Remote Retrieval functions. The LCD will indicate when you have a fax stored in memory.

1 Press Menu/Set, 2, 5, 2. The LCD prompts you to choose a fax setting.

2 Press or to select ON (or OFF),

and then press Menu/Set.

3Press Stop/Exit.

If there are faxes in memory when you turn the Fax Storage OFF, the LCD prompts you to erase any faxes in memory.

If you press 1, all fax data is erased and Fax Storage is turned off. If you press 2, data is not erased and Fax Storage remains on.

(See Printing a Fax in Memory, page 6-6.)

Backup Print

If you’ve set FAX STORAGE to ON, your fax machine automatically prints faxes as they are received into memory. This is a safety feature in case the power goes out so you won’t lose your messages.

10 - 2 R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S )