134
Press the keys in the
specified order
Appendix
17.5.0 0 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Dialling properties

Switching on the keypad protocol –

Using the keypad protocol allows you to take advantage of
additional features offered by other providers, e.g. voice
mail boxes or call answering services.
For detailed information about keypad control, please con-
tact your provider.
Call the menu.
Select and confirm.
Activate the function, the display must be highlighted.
# and $The phone is in standby.

– Switching on during a call –

The function is activated for this call only.
You are conducting an external call. The following entries
are transmitted in the keypad protocol instead of tone
dialling.
Call the menu.
Switch with “Key pad Off”.
®Activating a dialling procedure deactivates the other
dialling procedures.
®The automatic keypad protocol enables sequences
of characters to be dialled while a connection is be-
ing established. These characters begin with * and
end with #. The sequences are used to control func-
tions in the exchange. Automatic tone dialling is
always activated as soon as the called party‘s phone
rings.
©Handset: Press and to switch the
keypad protocol on. Then enter keypad informa-
tion. If necessary, press and to
switch the keypad protocol off again.
135
Press the keys in the
specified order
Appendix
17.5.0 0 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0

–the next time a connection is

set up –
All dialling characters are transmitted in the keypad proto-
col.
Call the menu
Select and confirm.
The display is highlighted if this function is activated.

Dialling * and #

This dialling procedure can be used to control individual
telephone functions when operated on telephone sys-
tems. Automatic tone dialling is always activated as
soon as the called party‘s phone rings.
Call the menu.
Select and confirm.
The display is highlighted when this function is activated.
# and $The phone is in standby.

Normal dialling

Normal dialling is active on delivery. Automatic tone dial-
ling is always activated as soon as the called party‘s phone
rings.
Call the menu.
Select and confirm.
To switch off the keypad protocol or the */# dialling proce-
dure, highlight “Norm.dialling”.
Activate the function.
# and $The phone is in standby.
>Handset: Activate the menu and sele ct “Ser-
vice Set up”. Then proceed as with the base station
telephone.