17.5.00 | Anhang.fm | Gigaset3035isdn |
Appendix
Press the keys in the specified order
17.5.00 | Anhang.fm | Gigaset3035isdn |
Appendix
Press the keys in the specified order
HWLQJ÷÷÷÷÷÷÷÷
<'HIDXOW2SHUDWLRQDO6SHF\VWHPIXQFWLRQV5HVHW÷HWQJVP÷
=
<5HVHWDOO=or
<(6
or 12
#and $
Restoring factory settings
You can withdraw your settings using the following menu options
●Operational or
●Reset all.
Call the menu.
Select and confirm.
Enter the base PIN (factory setting 0000) and confirm.
To restore operational status:
●All MSNs are deleted (see page 97).
●All subscribers (base station telephone/handsets) are unrestricted (see page 99).
●AM PIN is reset to 0000 (see page 122).
●The ringer volume is reset (see page 69).
●The access code (exchange code) is deleted (see page 136).
●The accounts are deactivated (see page 54).
●Call restrictions are switched off (see page 87).
●Remote operation is switched off (see page 123).
Reset all:
In addition:
●All PINs are reset to 0000 (see page 55, page 82).
●Directory (see page 35), caller list (see page 33), pro- vider entries (see page 58) and short cut entries (see page 76) are deleted.
●
●Call charge settings are deleted (see page 48).
●User‘s own announcements are deleted (see page 105).
The phone is in standby.
®Any previously set external call forwarding remains active. The call forwarding message will appear af- ter the MSN is entered. Handsets always remain registered.
HWLQJ÷÷÷÷÷÷÷÷
<5HSHDWHU÷÷÷÷÷÷÷6SHF\VWHPIXQFWLRQVHWQJV=
#and $
Accessories
Activating setting for operation with repeater
A repeater will extend the range of the handsets connect- ed to a base station telephone.
The following settings must be made when you register a repeater at the base station telephone. They guarantee that the base station telephone and repeater work togeth- er for optimum performance.
Call the menu.
Select and confirm.
The display is highlighted when the function is active.
The phone is in standby.
®To register the repeater, you must first prepare the base station telephone for registration (see page 91).
Registering a cordless telephone terminal box (TAE)
The cordless TAE connector enables you to use terminals (device types) such as phones, answering machines (with analog network connection), fax machines (group 2/3) or modems without cords in the vicinity of the base station telephone.
The procedure for registering the TAE is similar to that for a handset. For more information, consult the operating in- structions for the TAE.
Because analog fax machines and modems do not trans- mit a service ID, it is possible, for example, that incoming fax calls may not be recognised and thus could be misdi- rected. This is why is it recommended that a separate call number (MSN) should be used for your fax machine/mo- dem and that the device type should be set as ‘neutral”.
➡
140
141
