
17.5.00 | Anrufb.fm | Gigaset3035isdn |
Answering machine
Press the keys in the specified order
17.5.00 | Anrufb.fm | Gigaset3035isdn |
Answering machine
Press the keys in the specified order
3
%DVLF6HWWLQJV
<&KDQJH$03,1÷÷÷
P=
#and $
3
%DVLF6HWWLQJV P
<$0/RFN÷÷÷÷÷=
#and $
Changing the AM PIN
Call up the AM menu.
Select and confirm.
Enter and confirm the system PIN (factory setting is 0000).
Enter and confirm the new AM PIN (maximum 8 digits).
Enter and confirm the AM PIN again.
The phone is in standby.
®You can check the AM PIN you have defined by test- ing the AM lock.
Activating the AM lock
If you want to protect messages and settings against un- authorised access.
Prerequisite: you must enter a new AM PIN. The factory setting for the AM PIN is “0000”.
Call up the AM menu.
Select and confirm.
Enter and confirm the system PIN (factory setting is 0000).
Select and confirm.
The phone is in standby.
3
%DVLF6HWQJ
P
<5HPRWH&RQWURO2SWLRQV÷=
#and $
3
%DVLF6HWQJ
P
<5HPRWH'HOHWH÷2SWLRQV÷÷=
#and $
Remote replay
You can query and operate the answering machine of your base station telephone from any other phone (e.g. hotel, payphone) and from your handset, i.e. check and delete messages, record announcements and activate/deactivate the answering machine.
®If you are using the remote replay function from an older telephone, you will need to use a tone gener- ator or switch this telephone to DTMF.
Prerequisites for using remote replay
●You must have changed the AM PIN at least once.
●Remote replay must be enabled.
Enabling remote replay
Prerequisite: you have changed the AM PIN (see page 122).
Call up the AM menu.
Select and confirm.
Enter and confirm the system PIN (factory setting is 0000).
Activate/deactivate function.
The phone is in standby.
Enabling remote delete
If you want to delete messages and memos remotely you must enable this function.
Call up the AM menu.
Select and confirm.
Enter and confirm the system PIN (factory setting is 0000).
Activate/deactivate the function.
The phone is in standby.
122
123