
Administration
Transferring Phone Software, Application and Media Files
3.10.4Music on Hold
If enabled by the user, the Music on Hold (MoH) sound file is played when a call is put on hold.
>file is too large or the contents of the file are not valid, the file will not be stored in the phone.With V1R4.x upwards, the file size for a Music on Hold file is limited to 1MB. If the
The following formats for Music on Hold are supported:
•Proprietary Music on Hold format for optiPoint 410/420 phones
•WAV format. The recommended specifications are:
•Audio format: PCM
•Bitrate: 16 kB/sec
•Sampling rate: 8 kHz
•Quantization level: 16 bit.
•MIDI format.
•MP3 format (OpenStage 60/80 only). A bitrate of 48 kB/sec is recommended.
3.10.4.1FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set- tings”) are to be used, Use Default must be set to "Yes", and only the Filename must be spec- ified.
Data required (in every case)
•Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
•Server address: IP address or hostname of the FTP/HTTPS server in use.
•Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
•FTP account: Account at the server (if applicable).
•FTP username: User name for accessing the server.
| |
HiPath 8000 - OpenStage Family, Administration Manual |