Siemens 8000 manual Access via Local Phone

Administration

Access via Local Phone

3 Administration

This chapter describes the configuration of every parameter available on the OpenStage phones. For access via the local phone menu, see the following; for access using the web in- terface, please refer to Section 2.3.1, “Access the Web Interface (WBM)”.

3.1Access via Local Phone

The data entered in input fields is parsed and controlled by the phone. Thus, data is >accepted only if it complies to the value range.

1. Access the Administration Menu

OpenStage 60/80:

Press the v key to activate the administration menu (the v key toggles between the user’s configuration menu and the administration menu).

OpenStage 60/80 V1R3.x upwards:

The v key toggles between the Settings menu, the Applications menu, and the applica- tions currently running. Press the v key repeatedly until the "Settings" tab is active. (The v key toggles between the Settings menu, the Applications menu, and the applications currently running.)

OpenStage 20/40:

Press the keys D, l, and i consecutively to select the administration menu.

2. Enter Password

When the Admin menu is active, you will be prompted to enter the administrator password. The default admin password is "123456". It is recommended to change the password (see Section 3.14, “Password”) after your first login.

For entering passwords with non-numeric characters, please consider the following: By default, password entry is in numeric mode. For changing the mode, press the # key once or repeatedly, depending on the desired character. The # key cycles around the input modes as follows:

(Abc) -> (abc) -> (123) -> (ABC) -> back to start.

A31003-O1010-M100-10-76A9, 13/06/2008	3-1
HiPath 8000 - OpenStage Family, Administration Manual