Administration
Transferring Phone Software, Application and Media Files
3.10.8Screensaver
The screensaver is displayed when the phone is in idle mode. It performs a slide show consist- ing of images which can be uploaded using the web interface.
>Screensavers are available only on OpenStage 60/80 phones.
With V1R4.x upwards, the file size for a screensaver image is limited to 300 KB. If
>the file is too large or the contents of the file are not valid, the file will not be stored in the phone.
For screensaver images, the following specifications are valid:
•Data format: JPG or PNG. JPG is recommended.
•Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/ height ratio differing from 4:3 will appear with deviant proportions.
•Resolution: The phone’s screen resolution is the best choice for image resolution:
•OpenStage 60: 320x240
•OpenStage 80: 640x480
3.10.8.1FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set- tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec- ified.
Data required (in every case)
•Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
•Server address: IP address or hostname of the FTP/HTTPS server in use.
•Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
•FTP account: Account at the server (if applicable).
HiPath 8000 - OpenStage Family, Administration Manual |
