Siemens 8000 manual Snmp

Administration

IP Network Parameters

Administration via Local Phone

---Administration

---Network

---Update Service (DLS)

---DLS address

---DLS port

---Contact gap

---Security status

3.3.8SNMP

The Simple Network Management Protocol is used by network management systems for mon- itoring network-attached devices for conditions that warrant administrative attention. An SNMP manager surveys and, if needed, configures several SNMP elements, e.g. VoIP phones.

The OpenStage phone supports SNMP version 1 and 2.

There are currently 4 categories of trap that can be sent by the phones:

Standard SNMP traps

OpenStage phones support the following types of standard SNMP traps, as defined in RFC 1157:

•coldStart: sent if the phone does a full restart.

•warmStart: sent if only the phone software is restarted.

•linkUp: sent when IP connectivity is restored.

QoS Related traps

These traps are designed specifically for receipt and interpretation by the QDC collection sys- tem. The traps are common to SIP phones, HFA phones, Gateways, etc.

Traps for important high level SIP related problems

Currently, these traps are related to problems in registering with a SIP Server and to a failure in remotely logging off a mobile user. These traps are aimed at a non-expert user (e.g. a stan- dard Network Management System) to highlight important telephony related problems.

Traps specific to OpenStage phones

Currently, the following traps are defined:

TraceEventFatal: sent if severe trace events occur; aimed at expert users.

TraceEventError: sent if severe trace events occur; aimed at expert users.

A31003-O1010-M100-10-76A9, 13/06/2008	3-21
HiPath 8000 - OpenStage Family, Administration Manual