administration.fm
A31003-O1010-M100-10-76A9, 13/06/2008
HiPath 8000 - OpenStage Family, Administration Manual 3-81
Administration
Transferring Phone Software, Application and Media Files
3.10.3 Phone Software
The firmware for the phone can be updated by downloading a new software file to the phone.
3.10.3.1 FTP/HTTPS Access Data
If the default FTP/HTTPS Access settings (see Section 3.10.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
•Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
•Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
•Server address: IP address or hostname of the FTP/HTTPS server in use.
•Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
•FTP account: Account at the server (if applicable).
•FTP username: User name for accessing the server.
•FTP password: Password corresponding to the user name.
•FTP path: Path of the directory containing the files.
•HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
7Do not disconnect the phone from the LAN or power unit during software update. An
active update process is indicated by blinking LEDs and/or in the display.