Administration
A31003-O1010-M100-10-76A9, 13/06/2008
3-4 HiPath 8000 - OpenStage Family, Administration Manual
administration.fm
Access via Local Phone
OpenStage 60/80
If a parameter is set by entering a number or character data, the onscreen keypad is used.
Press the i key to enter the editor. Within the editor, solely use the key numbers or the
Sensor Wheel for selecting numbers, characters, or groups of characters. The h key de-
letes one character in the input field, and the g key moves the cursor to the OK field.
The following figure describes the elements of the onscreen keypad and their functions:
Additionally, you can use the following keys on the keypad as shortcuts for the selection of
character groups
OpenStage 20/40
With the OpenStage 20/40, use the keypad for entering parameters. With the 3 way/5 way-
Navigator, you can enter, delete, copy and paste characters and numbers as well as navi-
gate within an entry and toggle the input mode.
6. Save and exit
When you are done, select Save & exit and press .
Element Function
*Switch to punctuation and special characters.
#Toggle between lowercase characters, uppercase characters, and digits.
Element with focus
Letters, digits, punctuation marks or special characters
Command line
Shift to numeric entry
Shift to upper/lower case
Copy contents of active field to clipboard
Move cursor left/right
Shift to punctuation and special characters
Insert clipboard contents at cursor position