Siemens 8000 manual Pickup alert V1R3.x upwards

Administration

Features - Configuration

3.6.2.2Pickup alert (V1R3.x upwards)

If desired, an incoming call for the pickup group can be indicated acoustically.

The Group pickup tone allowed parameter activates or deactivates the generation of an acoustic signal for incoming pickup group calls. The default is "Yes". If this is activated, Group pickup as ringer determines whether the current ringtone or an alert beep is used. If set to "Yes", a pickup group call will be signaled by a short standard ringtone. If set to "No", a pickup group call will be signaled by an alert tone. The default is "Yes".

Group pickup visual alert defines the user action required to accept a pickup call. If "Prompt" is selected, an incoming pickup call is signaled by an alert on the phone GUI. As soon as the user goes off-hook or presses the speaker key, the pickup call is accepted. Alternatively, the user can press the corresponding function key, if configured. If "Notify" is selected, an incoming pickup call is signaled by an alert on the phone GUI. To accept the call, the user must confirm the alert or press the corresponding function key, if configured.

Administration via WBM

System > Features > Configuration

3-48	A31003-O1010-M100-10-76A9, 13/06/2008
	HiPath 8000 - OpenStage Family, Administration Manual