Getting Started
Control (Panel)
Oven Control Panel
Light
Time
Clock | Oven Temperature | Control Knob |
AM |
| Cooking Mode |
PM |
|
|
|
| Temperature |
Off
Start
Cooking | Lock Indicator |
Preheat Temperature Mode Indicator |
|
Figure 10: Oven Control Panel
Table 1: Oven Control Panel
Clock– Shows the time of day with a 12 or 24 hour option. Also displays the timer and times associated with delayed cooking and cleaning modes. Turn the control knob to tog- gle between timer and clock display. Press TIME and turn the control knob to change the time of day or the timer.
Cooking Mode - Press pad to display cooking mode.
Cooking Mode Icon – Shows the cooking elements that are active for the mode that is selected. The icon will also display a fan if the convection fan is utilized in the selected mode.
Control Knob - Used to set the clock, timers, select cook- ing mode and temperature. Turn clockwise to increase and turn counterclockwise to decrease.
Light - Press pad to turn oven light on or off.
Door Locking Indicator - Icon is displayed during the
Off - Press pad to turn off oven and/or warming drawer. Oven Temperature - Shows the oven temperature.
Preheat Temperature - Displays temperature of oven dur- ing preheat mode.
Probe Indicator (some models) - Indicates that the probe is properly inserted into the probe receptacle in the oven.
Start - Press pad to complete an entry.
Temperature - Press pad to select cooking temperature.
Time - Press pad to set or change the time of day or the timer.
Timer – There are two timers - TIMER 1 AND TIMER 2; Each counts down the time in hours and minutes. With less than 60 minutes remaining, the timer also displays seconds. Press Time to access the timers.
Warming Drawer Indicator - Indicates that the warming drawer is on. Also displays the warming drawer setting.
You control the operation of the range by using the touch pads, dial and control knobs.
The touchpads, in conjunction with the dial, are used to select an oven mode, set the oven temperature, set the time(s) and to set up your range. To use the touchpad, press the center part of the pad with the flat part of your fingertip. A beep will sound to indicate that the selection has been made. Turn the dial to the desired setting and press START.
The knobs are used to control the heat level of the burners. Push down and turn to the 
symbol to light and then to the desired heat setting.
See the sections on Using the Cooktop, Using the Oven and Using the Warming
Drawer for detailed instructions.
English 14
