Siemens HD2528U, HD2525U Remove Racks, Delayed CLEAN, Self Clean End, appears. Press START

Models: HD2528U HD2525U

1 52
Download 52 pages 52.85 Kb
Page 44
Image 44
Setting the Self-Clean Mode

Cleaning and Maintenance

Setting the Self-Clean Mode

Delaying the Start of the Self-Clean

5.Be sure oven light is turned off and the light bulbs and lens covers are in place. Do not operate oven without light bulb and cover in place.

Important: Do not use Commercial Oven Cleaners on the self-clean oven or any part because they will damage the finish or part.

1.Press COOKING MODE.

2.Turn knob until SELF CLEAN mode appears. Press START.

3.The default cleaning time is 4 hours. To

change cleaning time, turn knob to change

3: 00

SELF CLEAN

number of hours. Otherwise, continue to

 

 

3

step 4.

 

4.Press START. SELF CLEAN flashes. Press START.

5.REMOVE RACKS appears in the dis-

play as a reminder to remove oven

SELF CLEAN

racks.

4: 00

REMOVE RACKS

6. Press START again to begin the self-

clean.

 

Note:

The door locks at the beginning of the cycle; The door lock symbol will appear in the display at this point. If door does not lock, press OFF and do not self-clean; phone service.

Note:

The time of day must be correctly set for this option to work properly. See section “Setting the Clock” in “Getting Started”.

1.Press COOKING MODE.

2.Turn knob until SELF CLEAN mode appears. Press START.

3.The default cleaning time is 4 hours. To change cleaning time, turn knob to change number of hours. Otherwise, continue to step 4.

4.Press START.

5.Turn knob until DELAYED CLEAN mode

appears. Press START.

3: 00

SELF CLEAN

 

Delayed CLEAN

6.

SELF CLEAN END appears in the display.

SELF CLEAN

7.

Turn knob to enter the time of day you want

5: 45

 

the self-clean to end: Set hours, press time,

 

SELF CLEAN END

 

set minutes.

 

8.Press START. The display will remind you to remove oven racks.

9.Press START. The display shows DELAYED CLEAN. The self-clean will automatically start at the appropriate time.

Note:

In the Delayed Self-Clean Mode, the door latch automatically acti- vates at the beginning of the cycle. The door lock symbol will appear in the display.

Note:

The oven lights do not operate in the Self-Clean mode.

After Self-Cleaning

1. At the end of the programmed cleaning time, the oven will automatically turn

 

off. SELF CLEAN END appears in the display. Press OFF to clear.

English 42

Page 44
Image 44
Siemens HD2528U, HD2525U manual Remove Racks, Delayed CLEAN, Self Clean End, appears. Press START, After Self-Cleaning