Siemens HD2528U, HD2525U manual Replacing the Oven Door, Replacing an Oven Light

Cleaning and Maintenance

3. Flip lever on hinge toward you.

		Figure 17: Hinge Positions
	4.	Close the door to approximately halfway open.
	5.	Holding the door firmly on both sides using
		both hands, pull the door straight out of the
		hinge slots. Hold firmly, the door is heavy.
	6.	Place the door in a convenient and stable
		location for cleaning.
Replacing the Oven Door	1.	Holding the door firmly in both hands, place hinges in hinge slots.
	2.	Open door all the way to expose hinges and slots. Push lever (one on each
		hinge) away from you (back toward range).
	3.	After moving the hinge brackets back down into position, be sure to close
		and open the door slowly to assure that it is correctly and securely in place.
	4.	Door should be straight, not crooked.
Replacing an Oven Light	Each light assembly consists of a removable lens, a light bulb and a light socket
	housing that is fixed in place.

	WARNING:
	• Make sure the appliance and lights are cool and power to the
	appliance has been turned off before replacing the light
	bulb(s). Failure to do so could result in electrical shock or
	burns.
	• The lenses (if equipped) must be in place when using the
	appliance.
	• The lenses (if equipped) serve to protect the light bulb from
	breaking.
	• The lenses (if equipped) are made of glass. Handle carefully
	to avoid breaking. Broken glass could cause an injury.
	• Light socket is live when door is open
1.	Read the WARNING above.
2.	Turn off power at the main power supply (fuse or breaker box).
3.	Remove the lens by unscrewing it.
4.	Remove the light bulb from its socket by unscrewing it.
5.	Replace the bulb with a new 40 watt appliance bulb. Avoid touching the bulb
	with fingers, as oils from hands can damage the bulb when it becomes hot.
6.	Screw the lens back on.
7.	Turn power back on at the main power supply (fuse or breaker box).

English 44