PROFIBUS DP Master Interface IM 467/IM 467 FO
8-2 S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
8.1 PROFIBUS DP Master Interface IM 467/IM 467 FO

Order Numbers

IM 467 6ES7467-5GJ02-0AB0 (RS 485)
IM 467 FO 6ES7467-5FJ00-0AB0 (F0)

Application

PROFIBUS DP, standardized to IEC 61784–1:2002 Ed1 CP 3/1, enables rapid
communication in the field between programmable controllers, PCs and field
devices. Field devices are devices such as: ET 200 distributed I/O devices, drives,
valve terminals, switchgear and many others.
The IM 467/IM 467 FO interface module is meant to be used in an S7-400
programmable controller. It permits the S7-400 to be connected to PROFIBUS DP.
Note
The PROFIBUS DP master interface IM 467 or IM 467 FO is not a
DP master in accordance with DPV 1.

Configuration

Configured as for the S7-400
Can be operated without a fan
A maximum of 4 IM 467/IM 467 FO can be used in the central controller. There
are no slot rules.
The IM 467/IM 467 FO and the CP 443-5 Extended cannot be used together.
The transmission rate of 9.6 kbps to 12 Mbps can be set in steps using software
Configuration and programming are possible via PROFIBUS DP.
You must not, however, change the PROFIBUS DP parameters.
IM 467 with 9-pin subminiature D female connector for connection to
PROFIBUS DP (6ES7467-5GJ02-0AB0)
IM 467 FO with fiber-optic cable for connection to
PROFIBUS DP (6ES7467-5FJ00-0AB0)