CPUs for M7-400
11-35
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
11.4.11 Setup Page “Floppy/Card”
Opening the Setup Page
If you have selected “Floppy/Card” and activated the OPEN button in the Setup
menu (Figure 11-9 on page 11-23), this setup page appears on the screen
(Figure 11-17).
Figure 11-17 “Floppy/Card” Setup Page

What is the Purpose of the Setup Page?

You can enter the diskette (floppy disk) drive in your mass storage module and the
memory card drive in your CPU on this page.

Drive A

At the first power up or after the INS key has been pressed during booting, the
BIOS setup detects whether the CPU has been expanded by a mass storage
module and whether it therefore has a floppy disk drive available or not.
•If a floppy disk drive is available, the BIOS assigns drive A to it by activating the
option button “1.44 Mb”.
•If a floppy disk drive is not available, the BIOS assigns drive A to the memory
card drive by activating the option button “MemCard”.
If you do not want either of the two drives entered, activate the option button
“NONE”.
The other Drive A settings are not significant at the present time.

Drive B

Drive B stands only for the memory card drive within the CPU if a floppy disk drive
is entered in Drive A.
•Activate the option button “MemCard” if you want to work with a memory card.
•Otherwise, activate the option button “NONE”.
The other Drive B settings are not significant at the present time.
OK Button
Activating this button returns to the Setup menu. Changes on the setup page are
retained.
CANCEL Button
Activating this button returns to the Setup menu. Deletes all changes you have
made on the setup page.