Editing Parameters

6.Press to access the index value. Use and to scroll through the index values and to highlight the desired index value.

7.Press to confirm the new index value. The AOP returns to the parameter selection screen so you can select another parameter, if desired.

8.To edit another indexed parameter, repeat Steps 3 to 6.

NOTES:

1.Simultaneously press and , at any time, to return to the main menu.

2.Simultaneously press and , at any time, to display the parameter help screens.

AOP Stored Parameter Sets

The AOP contains a battery-backed storage facility for storing up to 10 parameter sets that are identified numerically from 00 to 09.

Only a parameter set containing parameter data can be edited. If the selected parameter set does not contain parameter data, the AOP asks if the default parameter set should be copied to the selected parameter set. When you confirm this request, the AOP copies only the editable parameters to the selected parameter set; read-only parameters are accessed from the original parameter location.

Editing AOP-Stored Parameter Sets

Use the following procedure to edit a parameter set:

1.From the main menu, use and to scroll through the list of options and to highlight the Mode item. Press to confirm the selection.

The AOP displays a mode menu so you can select the operating mode.

2.Use and to scroll through the list of mode options and to highlight the Internal item. Press to confirm the selection.

The AOP displays an internal mode menu so you can select the internal mode function.

3.Press again to confirm the selection and to return to the main menu.

4.Use and to scroll through the main menu and to highlight the Parameters item. Press to confirm the selection.

The AOP displays an internal edit parameter set menu so you can select the desired parameter set.

5.Use and to scroll through the list of parameter sets and to highlight the desired parameter set number.

You can now edit parameters associated with the selected parameter set.

Editing Internal AOP Parameter Set

1. Set P0003=3 (expert parameter access level).

Siemens Building Technologies, Inc.

15

Page 23
Image 23
Siemens SED2 manual AOP Stored Parameter Sets, Editing AOP-Stored Parameter Sets, Editing Internal AOP Parameter Set