SED2 AOP Operating Instructions
The AOP display the current status of the SED2 and motor. The following table explains information on this display.
STOPPED | F=0.00Hz | Fn | |
r0000 | P | ||
I=0.0A | RPM=0 | ||
| |||
M=0% | V=0.0V |
| |
|
|
|
Table 1. Status Information of an AOP Display with an Operating SED2.
Data | Description |
|
|
STOPPED
RUNNING
FAULT
WARNING
INHIBIT
r0000
F= 0.00 Hz
S= 0.00 Hz
I= 0.0 A
RPM= 0
M= 0%
V= 0.0 V
Vdc= 0.0V
and 
and 
and 
Indicates the motor connected to the SED2 is not running (pulses disabled).
Indicates the motor connected to the SED2 is running (pulses enabled).
Indicates a fault condition has occurred. The SED2 is not running. A fault, described by the AOP under the Diagnostics menu, is preventing operation.
The SED2 has detected a problem in normal operation and is informing you of the drive condition.
A previously occurring fault or OFF condition is preventing SED2 operation. Sending an OFF1 command from the currently active command source clears this condition.
Indicates a
Indicates the frequency at which the SED2 VFD/motor is running.
Indicates the speed (frequency) when the motor last stopped.
Indicates the output current.
Indicates the speed of the motor.
Indicates the current torque of the motor.
Indicates the output voltage.
Indicates the dc link voltage.
Simultaneously press these keys, at any time, to display the main menu.
Simultaneously press these keys to display the help screens.
Press P to select the parameter access screen.
Navigation keys to scroll through information on the display.
Indicates the direction of the running motor.
10 | Siemens Building Technologies |
