SED2 AOP Operating Instructions
3.The AOP displays a set day/date screen and highlights the first field (day of week).
Use 
and 
to scroll through and highlight the desired day of week. Press 
to confirm the entry.
The cursor advances to the first date field (day of month).
4.Use 
and 
to scroll through the digits until the desired day of the month
Press 
to confirm the entry.
The cursor advances to the next date field (month
5.Press and hold the 
key to accept the Day/Date settings and to return to the setup menu.
AOP Reset
:$51,1*
The AOP reset function enables the deletion of all parameter sets and settings, internal faults, and message logs stored in the AOP.
1.Use 
and 
to highlight the AOP Reset option on the setup menu. Press 
to confirm the selection.
The AOP displays an AOP reset screen.
2.Use 
and 
to select ON or OFF to enable or disable the AOP reset function respectively.
Press 
to confirm the selection.
Press 
to cancel this selection and to return to the setup menu.
3.When you select OFF, the AOP disables the AOP reset function and returns to the setup menu.
When you select ON, the AOP displays the parameter reset screen.
Press 
to confirm the AOP reset function and to delete all parameter sets, internal faults, and message logs. The AOP then restarts.
Press 
to cancel this selection and to return to the setup menu without deleting any information. The AOP then restarts.
NOTE: Simultaneously press 
and 
at any time to display relevant help screens.
28 | Siemens Building Technologies |
