Key Functions, Key Function Functional Description

SED2 AOP Operating Instructions

Key Functions

NOTE: This symbol is used throughout this manual to indicate a special keypad function.

Stops the motor.

Main Menu

Help

Delete

Parameter

Set

Software Version

Scrolling Function

OFF1	Press this button to stop the SED2 within the selected ramp-down time. As part of
the factory setting, this function is enabled for manual mode.
OFF2	Press this button twice (or once with sustained pressure) to cause the motor to

coast freely to a standstill. This function is enabled in the manual and automatic operating modes.

Starts the motor. As part of the factory setting, this function is enabled for manual mode.

Places the SED2 VFD in HAND mode.

Places the SED2 VFD in AUTO mode.

Increases the display value.

During parameterization, this button increases the current value. In manual mode, this button increases the speed (internal motor potentiometer).

Decrease the display value.

During parameterization, this button decreases the current value. In manual mode, this button decreases the speed (internal motor potentiometer).

Accesses the parameters. Also exits a parameter by accepting its value.

Error Acknowledgement:

When a fault occurs and the SED2 VFD trips, use this button to acknowledge the error.

Jump Function:

—Press this key (from any parameter, rXXXX or PXXXX) to return to the r0000 display.

—Press this key again to return to the previous screen.

—Press this key for several seconds to return to the status screen (normal operating mode).

Simultaneously press	and	, at any time, to display the main menu.

Simultaneously press	and	, at any time, to display the relevant help screens.

While uploading a parameter set, press			and	to delete any previously stored data in
that parameter set.

While viewing a stored parameter set, press				and	to display the software version of that
parameter set.

Press and to scroll through text on a display consisting of more than four lines.

4	Siemens Building Technologies