AOP Setup & Configuration

2. Use

and

to select an ON or OFF user text status.

Press

to cancel this selection and to return to the setup menu.

Press

to confirm the selection and the AOP displays a text screen with the first character

highlighted. The text string can contain a maximum of 20 characters.

3.Use and to scroll through the characters until the desired character is shown. Press to accept the character and to advance to the next character.

Repeat this step until the desired text is entered.

4.Press and hold to except the text string and to return to the setup menu.

Press and hold to cancel the text entry, restore the original text string, and to return to the setup menu.

NOTE: Simultaneously press and at any time to display relevant help screens.

Parameter Set Names

Use the following procedure to edit the names associated with the ten AOP parameter sets.

NOTE: This editing option is not available in the standard access level.

1.Use and to highlight the Parameter Set Names option on the setup menu. Press to confirm the selection.

The AOP displays a parameter set name screen.

2.Use and to scroll through the parameter sets and to highlight the name needing editing.

Press to confirm the selected parameter set name and the AOP highlights the first character.

3.Use and to scroll through the characters until the desired character is shown. Press to accept the character and to advance to the next character.

Repeat this step until the desired text is entered.

4.Press and hold to except the text string and to return to the setup menu.

Press and hold to cancel the text entry, restore the original text string, and to return to the setup menu.

NOTE: Simultaneously press and at any time to display relevant help screens.

Set Time/Date

1.Use and to highlight the Set Time/Date option on the setup menu. Press to confirm the selection.

The AOP displays a set time screen and highlights the first time field (hours).

2.Use and to scroll through the digits until the desired hour (0-23) displays. Press to confirm the entry.

The cursor advances to the next time field (minutes [0-59], and then seconds [0-59]). Repeat this step until the desired time (hours-minutes-seconds) is set.

Siemens Building Technologies, Inc.

27

Page 35
Image 35
Siemens SED2 manual Parameter Set Names, Set Time/Date