Siemens SL100 61

Using several handsets

Accepting/rejecting call waiting during an internal call

If you get an external call while conducting an internal call, you will hear the call waiting tone (short tone). The caller's number or name will appear in the display if Calling Line Identification is enabled. If you reject the call waiting tone on your handset, it can still be heard on other registered handsets.

either ...	Cancelling internal call, accepting external call:

[RRRRRRRRRRRRRRRRRRRRR]	Press the display key. The internal call is ended. You
	are connected to the external caller.

or ...	Reject external call:

[ RRRRRRRRRRRRRRRRRR]	Press the display key. The call waiting tone is deacti-
	vated. You are still connected to the internal caller.

Listening in to an external call

You are conducting an external call. An internal party can listen in to this call and can speak as well. A signal tone indicates "listening in" to all call parties.

Precondition: The Listening In function is activated (factory setting: Off).

Activating/deactivating "internal listening in"

v ¢ Base Settings ¢ Add. Features ¢ Listening In

~ OKEnter the system PIN (page 72) and confirm

(‰ = On).


a	Long press (back to idle status).

Internal listening in

On your handset you see In use. You wish to listen in to this external call.


c		Press the talk key. You can now listen in to the call.
		All parties hear a signal tone.
		Ending listening in:

a		Press the end call key (signal tone).

i	If the first internal party presses the "end call" key a, a signal tone
i	sounds. The handset that is "listening in" is still connected to the external
	party however.

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set noise level in the room is reached (the baby cries). When you answer the call you hear the noise in the baby's room. The room monitor remains activated on the handset even after you hang up.