Enter or change the access code (maximum 3 digits) and press the display key.
Long press (back to idle status).
Select and confirm a dialling mode (highlighted with ).

Connecting the base station to a PABX

Connecting the base station to a PABX

The following settings are only needed when your PABX requires them, please refer to the operating instructions for your PABX.

i

You cannot send or receive text messages on PABXs that do not support

Calling Line Identification.

 

 

Dialling modes and and recall

The current setting is indicated by .

1. Step 2: Changing the dialling mode

The following dialling modes can be set: Tone dialling (DTMF),

Dial pulsing (DP)

(The decadic or pulse dialling on this device is unsuitable for use in the network in New Zealand).

v ¢ Base Settings ¢ Add. Features ¢ Dialling Mode s OK

a

For use in New Zealand please change the flash time to 600 ms.

2. Step 2: Setting the recall

v ¢ Base Settings ¢ Add. Features ¢ Recall

 

 

 

 

s

OK

 

Select and confirm recall (highlighted with ).

 

 

 

 

a

Long press (back to idle status).

Storing the access code (outside line code)

Precondition: Your PABX requires you to enter an access code before the telephone number when making an external call, e. g. "0".

v ¢ Base Settings ¢ Add. Features ¢ Access Code

~ à

Save Entry

 

Confirm. The entry is stored.

OK

 

 

 

a

 

Long press (back to idle status).

The access code will be automatically inserted before any of the numbers chosen from the calls list.

76