Preparing to use your phone
Preparing to use the handset
Removing the protective film
The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery
◆Insert the battery ensuring correct polarity (see figure on the left).
◆Position the battery cover so that it is open by around 3 mm, then slide up until it closes with a click.
◆To open the battery cover, press on the grooved area and slide down.
Use only the rechargeable battery recommended by Siemens on page 81! Never use conventional batteries
W types as this may cause significant damage to health and property. For example, the jacket of the battery could be destroyed (hazardous). The phone could also malfunction or be damaged.
Placing the handset into the charging unit and charging the battery
1.Plug the charger unit mains adapter into a mains socket.
2.Place the handset in the charger unit with the display up.
3.The handset is already registered with the base station. "INT 1" appears in the dis- play. This means that the handset has been assigned the first internal number. You can change the handset name "INT 1" (page 58).
If something goes wrong, you will have to register the handset manually as de- scribed from page 56. You can get help from a table containing basic questions and answers (page 78).
4.Now leave the handset in the charger for the battery to charge – the battery is sup-
plied uncharged. Battery charging is indicated in the top right of the display by the battery icon V flashing:
= | Battery (almost) flat | V | Battery 2/3 charged |
e | Battery 1/3 charged | U | Battery fully charged |
8