| Page 15 of 59 |
If a sensor in the zone is reporting a problem and there are no sensors in the same zone reporting a warning or an alarm then the zone displays grey
If any sensor is reporting a warning AND no sensor in the zone is in alarm then the zone will be displayed in orange.
If all sensors in the zone are in a normal condition then the zone displays green.
If any sensor in the zone is in alarm then the zone displays red
Problem | The sensor reports that the analog value is invalid. |
Warning | A concentration level above the warning set point. This also activates the |
| warning relay on the Sentry. |
Alarm | A concentration level above the alarm set point. This also activates the alarm |
| relay on the Sentry. |
Normal | None of the above. |
If the zone buttons are white then the problem being indicated does not relate to the state of the Sensor but relates to the transfer of new data to the web page.
Refer to Appendix 1.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
