Sierra 5391-01, 5391-02 user manual Sentry Firmware Version, Connections

T12017-Sentry_LANServer_Users_Manual Page 5 of 59

The standard LANServer package includes a “home” screen, a graphical “zone” screen, a tabular “zone” screen, an alarms screen, an event log screen and the Sentry display screen. The Alarms page contains all active alarms and notes whether or not they have been acknowledged. The Event Log page notes all events (alarms and change of states) that have occurred over a recent period of time.

1.4.Sentry Firmware Version

The LANServer is designed to work with Sentry controllers containing Sentry Firmware of version 6.10bF or newer. If the Sentry controller in question has an older firmware version please contact Sierra Monitor or a local SMC representative to obtain the necessary upgrade.

1.5.Connections

The standard Sentry LANServer Model 5391-01 includes the FieldServer Technologies LANServer plus the necessary cables and connectors to interface the LANServer to the Sentry controller and to the Ethernet. In a typical application the LANServer will be mounted in a NEMA 4X enclosure with the Sentry controller (Figure 1.1). If ordered with a Sentry NEMA 4X package the LANServer will already be installed in the enclosure with the serial connection from the LANServer to the Sentry controller(s). The LANServer will also be connected to an RJ45 connection mounted on the outside of the enclosure to which the user can connect to the LANServer via the web, WAN or Internet.

Fig 1.1: Model 5391-01 LANServer in NEMA 4X Enclosure

In applications where only one Sentry controller is involved (1 to 8 sensors) the LANServer will connect to the Sentry controller via RS-232 and to the PC with the LAN browser via a crossover Cat5 cable (or via a hub with a standard cat5 cable). (Figure 1.2)

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@fieldserver.com