Simrad SIMRAD HS50 manual Bracket mounting option

Simrad HS50 Heading Sensor

Bracket mounting (option)

An optional bracket, part no. 22084941, may be ordered from

Simrad.

Note!When the Display unit is bracket-mounted, it is not weatherproof from the back due to a breathing hole in the back cabinet. When bracket-mounted, the exposed parts of the plugs should be protected against salt corrosion.

1Locate the cradle on the mounting site and mark the 4 holes for the screws on the mounting surface.

2Drill the 4 holes and screw the cradle to the mounting surface.

3Remove the front panel corners, and use the supplied screws to fasten the Display unit to the left and right brackets.

4Apply the front panel corners.

5Use the two locking knobs to assemble the cradle with the left and right brackets and adjust the Display unit for the best viewing angle.

6Connect the cable from the Processing unit to the Display unit connector.

16 20221081 / F