![](/images/new-backgrounds/1314387/31438767x1.webp)
Simrad HS50 Heading Sensor
Differential corrections
The signal cable with the differential corrections is connected to the terminal block P205 on the Processing unit for
In the Diff. corrections submenu the correct baud rate and format for the signal must be set. If RTCM format is selected, the correct RTCM Options must be selected to enable differential corrections to be used in the position solution.
If data from more than one reference station are available on the link, HS50 automatically uses the nearest reference station to obtain the best solution. The default RTCM Option is MSB 1st and 6 of 8.
26 | 20221081 / F |