Simrad HS50 Heading Sensor
GPS heading, the heading output is determined from the inertial element.
The data quality status information indicated on the Display unit is also included in some of the NMEA messages that can be output on the serial lines.
HDT
POS
Navigation/HDT display
When pressing the NAV1/HDT button, the HS50 will toggle between two different displays for heading information.
Primary NAV1/HDT display, shown after the
True heading is shown as a big number in the center of the compass with the COG value above it.
Secondary NAV1/HDT display.
This display shows heading, course over ground and speed over ground values in big characters.
Navigation/POS display
The HS50 will toggle between three different displays for position information when the NAV2/POS button is pressed.
Primary display shown when the NAV2/POS button is pressed once. The display shows main navigation information.
Secondary NAV2/POS display.
The display presents position information in large numbers.
36 | 20221081 / F |
