Simrad HS50 Heading Sensor
Ethernet
The Processing unit can output data on Ethernet from terminal J60. In the Ethernet submenu the IP address, netmask, IP port number and output format have to be specified. For the NMEA format the messages GGA, GLL, VTG, HDT, ROT and RRE are included.
| IP Address: | Default setting: 010 000 021 030. |
| IP Netmast: | Default setting: 255 255 255 000. |
| Format: | Format on Ethernet line. The following |
|
| selections are available: NMEA and None. |
WARNING! | If “None” is selected as output format, no data will be | |
| sent to Ethernet line. | |
Caution! A change in IP Address and IP Netmask parameter will not
take effect before the HS50 is restarted!
Note! | The cable to be used has to be a crossed Ethernet cable. |
General
The General submenu includes selection of height aiding, velocity filtering, Clock data, NMEA id and Datum.
28 | 20221081 / F |
