EX500 Serial System | EX## - OME0008 |
● Safety Instructions ●
( Read carefully before handling. )
Thoroughly read this handling manual and related manuals mentioned here to ensure the safety and proper operation of the product.
These safety instructions are intended to prevent hazardous situations and / or equipment damage. These instructions indicate the level of potential hazard by labeling “ CAUTION “ or “ WARNING“ .
・Level of potential hazard
!CAUTION : Operator error could result in injury or equipment damage.
!WARNING : Operator error could result in serious injury or loss of life .
・Safety instructions for pneumatic equipment
！WARNING
1.The compatibility of pneumatic equipment is the responsibility of the person who designs the pneumatic system or decides its specifications.
Since the products specified here are used in various operating conditions, their compatibility with the specific pneumatic system must be based on specifications, or post analysis, and / or tests to meet your specific requirements.
2.Only trained personnel should operate pneumatically operated machinery and equipment. Compressed air can be dangerous if an operator is unfamiliar with it.
Assembly, handling or repair of pneumatic systems should be performed by trained and experienced operators.
3.Do not service machinery / equipment or attempt to remove components until safety is confirmed. 1.Inspection and maintenance of machinery / equipment should only be performed after confirmation of safe
2.When equipment is to be removed, confirm the safety process as mentioned above.
Cut the supply pressure for the equipment and exhaust all residual compressed air in the system.
3.Before machinery / equipment is
4.Contact SMC if the product is to be used in any of the following conditions:
1.Conditions and environments beyond the given specifications, or if product is used outdoors.
2.Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles, medical equipment, food and beverage, recreation equipment, emergency stop circuits, press applications, or safety equipment.
3.An application which has the possibility of having negative effects on people, property, or animals, requires special safety analysis.
・Safety instructions for electric equipment
！WARNING
1.The product specified here is designed to be used in ordinary factory automation equipment.
Prevent the use in machinery and / or equipment where human life may be directly injured and malfunction or failure may cause enormous loss.
2.Do not use in the explosive atmosphere, the atmosphere of flammable gas, the corrosive atmosphere. In these atmospheres, it may cause injury or fire.
3.Only The person who has professional knowledge should implement work of the carriage, the establishment, the piping, the wiring, the operation, the handling, the maintenance, the check.
If not, it will cause in being shocked, the injury, the fire and so on.
4.Install a direct stop circuit outside that to stop operation immediately and then to shut the power supply.
5.Do not disassemble the product for modifications.
It may injure the person or damage the property.
6.Do not wipe this product with any chemical solvent.
-1 -
