Regulatory statements
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: | ||
Manufacturer’s Address: | 11311 Chinden Boulevard | |
|
| Boise, Idaho |
declares that the product |
| |
Product Name: |
| HP LaserJet 1005 Series Printer |
Model Number: |
| Q2676A |
Product Options: |
| ALL |
conforms to the following Product Specifications: | ||
Safety: | IEC 60950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4+A11 | |
|
| |
| IEC | |
EMC: | CISPR 22:1997 / EN 55022:1998 Class B1 | |
| EN |
|
| EN |
|
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B2 /
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage
Directive 73/23/EEC, and carries the
1)The product was tested in a typical configuration with
2)This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
| Boise, Idaho USA |
| January 1, 2003 |
For Regulatory Topics ONLY, contact: | |
European Contact: | Your Local |
| |
| Europe, Herrenberger Straße |
| (FAX: |
USA Contact: | Product Regulations Manager, |
| PO Box 15, Mail Stop 160, Boise, Idaho |
| (Phone: |
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a “Class 1” laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.
WARNING! Using controls, making adjustments, or performing procedures other than those specified in this user guide could result in exposure to hazardous radiation.
ENWW | Regulatory statements 71 |