Status light patterns
Status light legendSymbol for “light off”
Symbol for “light on”
Symbol for “light blinking”
Status light patternsStatus lights Condition of the printer | Action |
|
|
Ready | No action is necessary. |
The printer is ready to print. |
|
Processing | Wait for the job to print. |
The printer is receiving or processing |
|
data. |
|
Cleaning Mode/Engine test | ● Wait until the cleaning page is finished |
A cleaning page or engine test page is | printing and the printer is in Ready mode. |
printing. | This could take up to 2 minutes. |
| ● Wait until the engine test page is finished |
| printing and the printer is in Ready mode. |
|
|
Out of memory | The page you are printing might be too complex |
The printer is out of memory. | for the printer’s memory capacity. Try lowering |
| the resolution. See Understanding print quality |
| settings for more information. |
Door open, media out, no print cartridge, media jam, or media jam levers are down
The printer is in an error state that requires operator intervention or help.
Check the following:
●The print cartridge door is completely closed.
●Media is loaded. See Loading media into the paper input tray for instructions.
●The print cartridge is correctly installed in the printer. See Changing the print cartridge for instructions.
●There is no media jam. See Clearing printer media jams for instructions.
●The media jam levers are in the upright position.
ENWW | Finding the solution 39 |