STEP 4: Insert the Card

Note: If you installed Socket’s WhereAreYou? software, you may want to use it now to set up the modem card for your country. You must start this process BEFORE inserting the card. For instructions, go to page 40

Insert the 56K Modem Card into the CompactFlash I/O slot of your BE-300. Make sure the card is right-side up, with the gray label on top.

Plug the card directly into a CompactFlash I/O slot.

Warning! Do NOT insert the card upside down, or damage may occur!

When you insert the card, the Power and Data Status LEDs will blink once then turn off.

CHAPTER 3: SETUP FOR CASIO BE-300 37

Page 37
Image 37
Socket Mobile 56K Modem Card manual Plug the card directly into a CompactFlash I/O slot